Show Ports Collisions - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show ports collisions

show ports {mgmt | <port_list>} collisions {no-refresh}
Description
Displays real-time collision statistics.
Syntax Description
mgmt
port_list
no-refresh
Default
Real-time statistics.
Usage Guidelines
If you do not specify a port number or range of ports, collision statistics are displayed for all ports. To
clear the counters, use the
refreshing real-time display. If you specify the
the data at the time you issue the command.
This status information may be useful for your technical support representative if you have a network
problem.
Example
The following command displays real-time collision statistics on slot 1, ports 1 and 2 on a modular
switch:
show ports 1:1-2 collisions
Following is sample output from this command:
Port Collision Monitor
Port
================================================================================
1:1
1:2
================================================================================
The numbers 1 to 16 represent the number of collisions encountered prior to successfully transmitting
the packet; this is applicable only for half-duplex links.
352
Specifies the management port.
Specifies one or more ports or slots and ports.
Specifies a static snapshot of data.
clear counters ports
Link Collision Histogram
Status 1 2 3 4
A 0 0 0 0
R 0 0 0 0
Link Status: A-Active R-Ready NP-Port not present
command. The default display is a constantly
parameter, the system displays a snapshot of
no-refresh
5 6 7 8 9 10
0 0 0 0 0 0
0 0 0 0 0 0
11 12 13 14 15
0 0 0 0 0
0 0 0 0 0
ExtremeWare XOS 11.3 Command Reference
16
0
0