Configure Log Target Syslog - Extreme Networks ExtremeWare XOS Command Reference Manual

configure log target syslog

configure log target syslog [all | <ipaddress> | <ipPort>] {vr <vr_name>}
{local0 ... local7} from <source-ip-address>
Description
Configures the syslog server's IP address for one or all syslog targets.
Syntax Description
syslog
all
ipaddress
ipPort
vr_name
local0 ... local7
source-ip-address
Default
If a virtual router is not specified, the following virtual routers are used:
ExtremeWare XOS 10.1—VR-0
●
ExtremeWare XOS 11.0 and later—VR-Mgmt
●
Usage Guidelines
NOTE
The BlackDiamond 8800 family of switches and the Summit X450 switch do not support user-created VRs.
Use this command to identify and configure the syslog server's IP address. By configuring a source IP
address, the syslog server can identify from which switch it received the log message.
Options for configuring the remote syslog server include:
—Specifies all of the remote syslog server hosts.
●
all
—The IP address of the remote syslog server host.
●
ipaddress
—The UDP port.
●
ipPort
—The virtual router that can reach the syslog host.
●
vr_name
—The syslog facility level for local use.
●
local0-local7
—The local source IP address.
●
from
ExtremeWare XOS 11.3 Command Reference
Specifies a syslog target.
Specifies all of the remote syslog servers.
Specifies the syslog server's IP address.
Specifies the UDP port number for the syslog target.
Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450
switch do not support user-created VRs.
Specifies the local syslog facility.
Specifies the local source IP address to use.
configure log target syslog
481