Extreme Networks ExtremeWare XOS Command Reference Manual page 521

You can also use the following command to enable displaying the log on the console:
enable log display
The
enable log display
command.
Modular Switches Only. Note that the
target is only active on the backup MSM.
primary-msm
Example
The following command enables log messages on the current session:
enable log target session
History
This command was first available in ExtremeWare XOS 10.1.
The and
primary-msm backup-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
command is equivalent to the
target is only active on the primary MSM, and the
backup-msm
options were first available in ExtremeWare XOS 11.0.
enable log target console-display
enable log target
521