Extreme Networks ExtremeWare XOS Command Reference Manual page 372

Commands for Configuring Slots and Ports on a Switch
Slot-6
Slot-7 G60T
Slot-8
MSM-A MSM-1XL
MSM-B MSM-1XL
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
E - Errors on slot will be ignored (no corrective action initiated)
The following example displays module information for a specified slot on the BlackDiamond 10K
switch:
BD-10808.3 # show slot 7
Slot-7 information:
State:
Download %:
Flags:
Serial number:
Hw Module Type:
SW Version:
SW Build:
004
Configured Type:
Ports available:
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
I - Insufficient Power (refer to "show power budget")
E - No corrective actions to be taken
You see the same output if you add the optional parameter
specified slot number.
The following example displays detailed module information for all slots:
BD-10808.4 # show slot detail
Slot-1 information:
State:
Flags:
Serial number:
Hw Module Type:
Configured Type:
Ports available:
Slot-2 information:
State:
Flags:
Serial number:
Hw Module Type:
Configured Type:
Ports available:
372
Operationa
100
M
804403-00-02 0330Z-00086
G60T
11.1.1.1
v1111b1 by release-manager on Fri Nov 5 06:42:22 PST 2
G60T
60
Empty
0
Empty
0
Empty 0
Operational 60
Empty 0
Operational 0
Present 0
to the command for displaying a
detail
ExtremeWare XOS 11.3 Command Reference
M