Configure Esrp Add Elrp-Poll Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp add elrp-poll ports

configure esrp <esrpDomain> add elrp-poll ports [<ports> | all]
Description
Configures the ports of an ESRP domain where ELRP packet transmission is requested by ESRP.
Syntax Description
esrpDomain
ports
all
Default
All ports of an ESRP domain have ELRP transmission enabled.
Usage Guidelines
This command allows you to configure the ports in your network that might experience loops, such as
ports that connect to master, slave, or ESRP-aware switches, to receive ELRP packets. You do not need
to send ELRP packets to host ports.
Example
The following command enables ELRP packet transmission for slot 2, ports 3-5 on ESRP domain esrp1:
configure esrp esrp1 add elrp-poll ports 2:3-2:5
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
988
Specifies an ESRP domain name.
Specifies list of slots and ports.
Specifies all ports in the ESRP domain.
ExtremeWare XOS 11.3 Command Reference