Extreme Networks ExtremeWare XOS Command Reference Manual page 510

Commands for Status Monitoring and Statistics
Configuration changes to the
telnet session, and are not saved in FLASH. Changes to the other targets are saved to FLASH.
You can also use the following command to disable displaying the log on the console:
disable log display
The
disable log display
command.
Modular Switches Only. Note that the
primary-msm
Example
The following command disables log messages to the current session:
disable log target session
History
This command was first available in ExtremeWare XOS 10.1.
The
primary-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
Platform Availability
This command is available on all platforms.
510
session
command is equivalent to
backup-msm
target is only active on the backup MSM.
and options were first available in ExtremeWare XOS 11.0.
backup-msm
target are in effect only for the duration of the console display or
disable log target console-display
target is only active on the primary MSM, and the
ExtremeWare XOS 11.3 Command Reference