Disable Jumbo-Frame Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

Commands for Configuring Slots and Ports on a Switch

disable jumbo-frame ports

disable jumbo-frame ports [all | <port_list>]
Description
Disables jumbo frame support on a port.
Syntax Description
all
port_list
Default
Disabled.
Usage Guidelines
BlackDiamond 8800 family of switches (formerly known as Aspen) and the Summit X450 switch only. You
must enable or disable jumbo frames for the entire switch; the BlackDiamond 8800 family of switches
and the Summit X450 switch do not support enabling or disabling jumbo frames by port.
BlackDiamond 10K switch only. You can enable jumbo frames per ports.
Example
The following command disables jumbo frame support on slot 1, port 2 on a BlackDiamond 10K switch:
disable jumbo-frame ports 1:2
The following command disables jumbo frame support on a BlackDiamond 8810 switch:
disable jumbo-frame ports all
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
314
Specifies all ports.
Specifies one or more ports or slots and ports.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450
switch support only all ports; you cannot enable or disable jumbo frames by
port on the switch.
ExtremeWare XOS 11.3 Command Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.3

Table of Contents