configure sys-health-check interval
Example
The following examples assume that you enabled backplane diagnostic packets on a specific I/O slot.
On the BlackDiamond 10K switch, the following command configures the backplane diagnostic packet
interval to 8 seconds and the polling interval to 80 seconds:
configure sys-health-check interval 8
On the BlackDiamond 8800 family of switches, the following command configures the backplane
diagnostic packet interval to 8 seconds:
configure sys-health-check interval 8
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available only on modular switches.
493
ExtremeWare XOS 11.3 Command Reference