Configure Snmp Syslocation - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmp sysLocation

configure snmp syslocation <sysLocation>
Description
Configures the location of the switch.
Syntax Description
sysLocation
Default
N/A.
Usage Guidelines
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the
command displays switch statistics including the location of the switch.
Example
The following command configures a switch location name on the system:
configure snmp syslocation englab
The following output from the
SysName: engineeringlab
SysLocation: englab
SysContact: FredJ
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
An alphanumeric string that specifies the switch location.
command displays englab as the location of the switch:
show switch
configure snmp sysLocation
command. The
show switch show switch
119