Commands for Configuring Slots and Ports on a Switch
show slot
show slot {<slot> {detail} | detail }
Description
Displays the slot-specific information.
Syntax Description
slot
detail
Default
N/A.
Usage Guidelines
The
show slot
The slot number
●
The type of module installed in the slot
●
The type that the module is configured as
●
The state of the module, whether the power is down, if the module is operational, if a diagnostic
●
being run, if there is a mismatch between the slot configuration and the module in the slot
The number of ports on the module
●
If you do not specify a slot number, information for all slots is displayed.
The display also includes a notice of insufficient power, should that arise.
The
show slot
Empty
●
Down
●
Power ON
●
Powered OFF
●
Booting
●
Initializing
●
VLAN sync
●
FDB sync
●
ACL sync
●
RT sync
●
Operational
●
370
Specifies a slot on a modular switch.
Specifies detailed port information.
command displays the following information:
command displays the following states, among others:
ExtremeWare XOS 11.3 Command Reference