Configure Snmpv3 Delete User - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmpv3 delete user

configure snmpv3 delete user [all-non-defaults | [[hex <hex_user_name>] |
<user_name>]]
Description
Deletes an existing SNMPv3 user.
Syntax Description
all-non-defaults
hex_user_name
user_name
Default
N/A.
Usage Guidelines
Use this command to delete an existing user.
Use the
all-non-defaults
default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Deleting a user will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]} user [all-non-
defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model [snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all non-default users:
configure snmpv3 delete user all-non-defaults
The following command deletes the user guest:
configure snmpv3 delete user guest
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_user_name
152
Specifies that all non-default (non-permanent) users are to be deleted.
Specifies the user name to delete. The value is to be supplied as a colon
separated string of hex octets.
Specifies the user name to delete.
keyword to delete all users, except for the default (permanent) users. The
parameter was added in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.3 Command Reference