Extreme Networks ExtremeWare XOS Command Reference Manual page 482

Commands for Status Monitoring and Statistics
If you do not configure a source IP address for the syslog target, the switch uses the IP address in the
configured VR that has the closed route to the destination.
Example
The following command configures the IP address for the specified syslog target named orange:
configure log target syslog orange from 10.234.56.78
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
482
ExtremeWare XOS 11.3 Command Reference