Command Reference Overview
If you attempt to execute a command and you do not either have the required license or have reached
the limits defined by the current license level, the system returns one of the following messages:
Error: This command cannot be executed at the current license level.
Error: You have reached the maximum limit for this feature at this license level.
Upgrading on the BlackDiamond 10K Switch Only
The licensing levels on the BlackDiamond 10K switch depend on the MSM you have in your system:
The MSM 1 ships with a Core license; you cannot upgrade to an Advanced Core license.
●
The MSM 1XL ships with an Advanced Core license.
●
NOTE
Beginning with ExtremeWare XOS version 11.2, you can run BGP with a core license on the BlackDiamond 10K
switch; that is both the MSM1 and the MSM1XL now run BGP.
If you attempt to execute a command and you do not either have the required license or have reached
the limits defined by the current license level, the system returns one of the following messages:
Error: This command cannot be executed at the current license level.
Error: You have reached the maximum limit for this feature at this license level.
Enabling and Displaying Licenses
To enable the license, use the following command:
enable license <key>
To display the current license level (as well as enabled feature packs), use the following command:
show licenses
Security Licensing
Certain additional ExtremeWare XOS features, such as the use of SSH2 encryption, may be under
United States export restriction control. Extreme Networks ships these security features in a disabled
state. You can obtain information on enabling these features at no charge from Extreme Networks.
Understanding the Command Syntax
This section covers the following topics:
Access Levels on page 35
●
Syntax Symbols on page 35
●
Command Completion with Syntax Helper on page 35
●
Names on page 36
●
Command Shortcuts on page 36
●
34
ExtremeWare XOS 11.3 Command Reference