Enable Smartredundancy - Extreme Networks ExtremeWare XOS Command Reference Manual

enable smartredundancy

enable smartredundancy
enable smartredundancy <port_list>
Description
Enables the Smart Redundancy feature on the primary port.
Syntax Description
portlist Specifies one or more ports or slots and ports.
Default
Enabled.
Usage Guidelines
You must configure the software-controlled redundant port using the
configure ports redundant
command prior to enabling Smart Redundancy.
The Smart Redundancy feature works in concert with the software-controlled redundant port feature.
With Smart Redundancy enabled on the switch, when the primary port becomes active the switch
redirects all traffic to the primary port and blocks the redundant port again. (If you disable Smart
Redundancy, the primary port is blocked because traffic is now flowing through the redundant, port.)
Example
The following command enables the Smart Redundancy feature on slot 1, port 4 on a modular switch:
enable smartredundancy 1:4
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
335
ExtremeWare XOS 11.3 Command Reference