Extreme Networks ExtremeWare XOS Command Reference Manual page 160

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Commands for Managing the Switch

This example assumes that you already created an ACL to apply to Telnet.

The following command applies the ACL MyAccessProfile_2 to Telnet:

configure telnet access-profile MyAccessProfile_2

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3