Disable Web Https - Extreme Networks ExtremeWare XOS Command Reference Manual

disable web https

disable web https
disable web https
Description
Disables the secure socket layer (SSL) access to the switch on the default port (443).
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
Use this command to disable SSL before changing the certificate or private key.
Similar to SSH2, before you can use any SSL commands, you must first download and install the
separate Extreme Networks SSH software module (ssh.xmod). This additional module allows you to
configure both SSH2 and SSL on the switch. SSL is packaged with the SSH module; therefore, if you do
not install the module, you are unable to configure SSL. If you try to execute SSL commands without
installing the module first, the switch notifies you to download and install the module. To install the
module, see the instructions in Appendix A of the ExtremeWare XOS Concepts Guide.
Example
The following command disables SSL on the default port:
disable web https
History
This command was first available in the ExtremeWare XOS 11.2 and supported with the SSH module.
Platform Availability
This command is available on all platforms.
781
ExtremeWare XOS 11.3 Command Reference