Show Ports Qosmonitor - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

show ports qosmonitor

show ports <port_list> qosmonitor {ingress | egress} {no-refresh}
Description
Displays real-time ingress rate shaping statistics in addition to QoS statistics for egress packets on one
or more ports.
Syntax Description
port_list
egress
ingress
no-refresh
Default
Shows QoS statistics for egress unless you specify ingress; shows real-time statistics.
Usage Guidelines
The real-time snapshot scrolls through the given port list to provide statistics.
If you do not specify a port number or range of ports, collision statistics are displayed for all ports. If
you specify the
the command
Examples
The following command shows the QoS egress statistics related to the specified ports:
# show port 1:1-1:2 qosmonitor
Following is sample output from this command:
Port Statistics
Port
===================================================================================
1:1
1:2
====================================================================================
The following command shows the QoS ingress statistics related to the specified ports:
# show port 1:1-1:2 qosmonitor ingress
722
Specifies one or more slots and ports.
Specifies to display statistics in egress. Default.
Specifies to display statistics on ingress rate shaping.
Specifies a static snapshot of data.
parameter, the system displays a snapshot of the data at the time you issue
no-refresh
QP1 QP2
Xmts Xmts
100 0
397 0
QP3 QP4 QP5
Xmts Xmts Xmts
0 0 0
0 0 0
QP6 QP7 QP8
Xmts Xmts Xmts
0 0
0 0 1432
ExtremeWare XOS 11.3 Command Reference
4