create netlogin local-user
create netlogin local-user <user-name> {encrypted <password>} {vlan-vsa
[[{tagged | untagged} [<vlan_name>] | <vlan_tag>]]}
Description
Creates a local netlogin user name and password.
Syntax Description
user-name
encrypted
password
tagged
untagged
vlan_name
vlan_tag
Default
N/A.
Usage Guidelines
Use this command to create a local network login account and to configure the switch to use its local
database for network login authentication. This method of authentication is useful in the following
situations:
If both the primary and secondary (if configured) RADIUS servers timeout or are unable to respond
●
to authentication requests.
If no RADIUS servers are configured.
●
If the RADIUS server used for network login authentication is disabled.
●
If any of the above conditions are met, the switch checks for a local user account and attempts to
authenticate against that local account.
Beginning with ExtremeWare XOS 11.3 you can also specify the destination VLAN to enter upon a
successful authentication.
Additional Requirements. This command applies only to the web-based and MAC-based modes of
network login. 802.1x network login does not support local database authentication.
ExtremeWare XOS 11.3 Command Reference
Specifies a new local netlogin user name. User names must have a minimum
of 1 character and a maximum of 32 characters.
The encrypted option is used by the switch to encrypt the password. Do not
use this option through the command line interface (CLI).
Specifies a local netlogin user password. Passwords must have a minimum of 0
characters and a maximum of 32 characters.
Specifies that the client be added as tagged.
Specifies that the client be added as untagged.
Specifies the name of the destination VLAN.
Specifies the VLAN ID, tag, of the destination VLAN.
create netlogin local-user
853
Need help?
Do you have a question about the ExtremeWare XOS and is the answer not in the manual?