Extreme Networks ExtremeWare XOS Command Reference Manual page 677

* * firewall1
The following command displays the ingress access list entries configured on the VLAN v1006:
show access-list v1006 ingress
The output from this command is similar to the following:
# RuleNo 1
entry dacl13 {
if match all {
ethernet-destination-address 00:01:05:00:00:00 ;
} then {
count c13 ;
redirect 1.1.5.100 ;
} }
# RuleNo 2
entry dacl14 {
if match all {
ethernet-source-address 00:01:05:00:00:00 ;
} then {
count c14 ;
qosprofile qp7 ;
} }
# RuleNo 3
entry dacl13 {
if match all {
ethernet-destination-address 00:01:05:00:00:00 ;
} then {
count c13 ;
redirect 1.1.5.100 ;
} }
History
This command was available in ExtremeWare XOS 10.1.
The option was removed in ExtremeWare XOS 11.1.
<aclname>
The
ingress,egress,any
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
ingress
#Dynamic Entry
#Dynamic Entry
, , and options were added in ExtremeWare XOS 11.3
ports vlan
2 1
show access-list
677