Disable Smartredundancy - Extreme Networks ExtremeWare XOS Command Reference Manual

disable smartredundancy

disable smartredundancy
disable smartredundancy <port_list>
Description
Disables the Smart Redundancy feature.
Syntax Description
port_list Specifies one or more ports or slots and ports.
Default
Enabled.
Usage Guidelines
The Smart Redundancy feature works in concert with the software-controlled redundant feature. When
Smart Redundancy is disabled, the switch attempts only to reset the primary port to active if the
redundant port fails. That is, if you disable Smart Redundancy, the traffic does not automatically return
to the primary port once it becomes active again; the traffic continues to flow through the redundant
port even after the primary port comes up again.
Example
The following command disables the Smart Redundancy feature on ports 1:1 to 1:4 on a modular
switch:
disable smartredundancy 1:1-4
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
321
ExtremeWare XOS 11.3 Command Reference