Disable Inline-Power - Extreme Networks ExtremeWare XOS Command Reference Manual

disable inline-power

disable inline-power
disable inline-power
Description
Shuts down PoE power currently provided on all ports on all slots.
Syntax Description
This command has no arguments or variables
Default
Enable.
Usage Guidelines
You can control whether inline power is provided to the system by using the
disable inline-power
command and the command. Using the command
enable inline-power disable inline-power
shuts down inline power currently provided on the entire switch or to specified ports and slots.
Disabling inline power to a switch, port, or slot immediately removes power to any connected PDs. By
default, inline power provided to all ports is enabled.
Disabling inline power does not allow PoE power reserved for slots to be allocated to other slots that
may be needing more power to become operational.
Disabling inline power using the command does not affect the data traffic
disable inline-power
traversing the port. And, disabling the port using the command does not affect the inline
disable port
power supplied to the port.
However, when you issue the command on a slot holding a PoE module, the inline
disable slot
power is also disabled; that slot is totally offline.
NOTE
Inline power cannot be delivered to connected PDs unless the BlackDiamond 8800 chassis and module are
powered.
Example
The following command shuts down inline power currently provided to all ports and all slots:
disable inline-power
History
This command was first available in ExtremeWare XOS 11.1.
423
ExtremeWare XOS 11.3 Command Reference