Show Ports Configuration - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show ports configuration

show ports {mgmt | <port_list>} configuration {no-refresh}
Description
Displays port configuration statistics.
Syntax Description
mgmt
port_list
no-refresh
Default
Real-time statistics.
Usage Guidelines
If you do not specify a port number or range of ports, configuration statistics are displayed for all ports.
If you specify the
issue the command.
This status information may be useful for your technical support representative if you have a network
problem.
This command displays port configuration, which includes:
Virtual router
●
Port state
●
Autonegotiation information
●
Link state
●
Link speed
●
Duplex mode
●
Flow control
●
Load sharing information
●
Link media information
●
NOTE
On 10 Gbps ports, the Media Primary column displays NONE when no module is installed, and SR, LR, or ER
depending on the module installed when there is one present.
354
Specifies the management port.
Specifies one or more ports or slots and ports.
Specifies a static snapshot of data.
parameter, the system displays a snapshot of the data at the time you
no-refresh
ExtremeWare XOS 11.3 Command Reference