Extreme Networks ExtremeWare XOS Command Reference Manual page 344

Commands for Configuring Slots and Ports on a Switch
Rx State—Receiving state of the port
●
Idle
■
Initialized
■
Current—Receiving LACP PDUs
■
Expired
■
Defaulted
■
Sel Logic—Selection state of the port
●
Selected—Ports with a matching admin key on the remote end.
■
Unselected—Ports that failed to meet with a matching admin key on the remote end.
■
Standby—Ports that exceed the number of ports that can be active in the LAG simultaneously.
■
These ports can be moved into selected mode if one of the currently selected ports in the LAG
goes down.
Mux State—Ability to transmit and collect data of the port
●
Waiting—Selected port that is waiting for LACP to determine if it can join the aggregator.
■
Attached—Ports ready to be added to the aggregator.
■
Collecting-Dist—Ports that are added to the aggregator and are transferring data.
■
Detached—Ports that cannot be added to the aggregator.
■
Actor Flag—Mux state of the port
●
A—Activity
■
T—Timeout
■
G—Aggregation
■
S—Synchronization
■
C—Collecting
■
D—Distributing
■
F—Defaulted
■
E—Expired
■
Partner Port
●
The operational value of the port number assigned to this link by partner.
■
Unack count
●
Wait-for-count
●
Receive state
●
Transmit state
●
Selected count—Number of selected ports in the LAG
●
Standby count—Number of standby ports in the LAG
●
LAG Id flag
●
S—Displays information on controlling partner of LAG.
■
T—Displays information on controlled partner of LAG.
■
Example
The following command displays information on the specified LACP LAG:
344
ExtremeWare XOS 11.3 Command Reference