Configure Lldp Ports System-Capabilities - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands

configure lldp ports system-capabilities

configure lldp ports [all | <port_list>] [advertise | no-advertise] system-
capabilities
Description
Configures the LLDP port to advertise or not to advertise its system capabilities to its neighbors.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
When at least one VLAN exists with more than two ports, bridging is sent to enabled.
When at least one VLAN on the switch has IP forwarding enabled, the system automatically sets the
router bit.
Example
The following command configures all ports to advertise system capability information to neighbors:
configure lldp ports all advertise system-capabilities
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
382
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
ExtremeWare XOS 11.3 Command Reference