show switch
show switch {detail}
Description
Displays the current switch information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The
command displays:
show switch
sysName, sysLocation, sysContact
●
MAC address
●
System health check
●
Recovery mode
●
Watchdog state
●
Current date, time, system boot time, and time zone configuration
●
Any scheduled reboot information
●
MSM information (available only on modular switches)
●
Current state (available only on stand-alone switches)
●
OPERATIONAL
■
OPERATIONAL (OverHeat)
■
FAILED
■
Software image information (primary/secondary image and version)
●
Configuration information (primary/secondary configuration and version)
●
This information may be useful for your technical support representative if you have a problem.
Depending on the software version running on your switch, additional or different switch information
may be displayed.
Example
The following command displays current switch information:
show switch
ExtremeWare XOS 11.3 Command Reference
show switch
97