show stpd ports
show stpd <stpd_name> ports {[detail | <port_list> {detail}]}
Description
Displays the STP state of a port.
Syntax Description
stpd_name
port_list
detail
Default
N/A.
Usage Guidelines
This command displays the following:
STPD port configuration
●
STPD port encapsulation mode
●
STPD path cost
●
STPD priority
●
STPD state (root bridge, and so on)
●
Port role (root bridge, edge port, etc.)
●
STPD port state (forwarding, blocking, and so on)
●
Configured port link type
●
Operational port link type
●
Use the
option to display detailed formats for all ports or for the specified ports.
detail
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If you do not specify the
keyword, an error message similar to the following is displayed:
stpd
%% Ambiguous command:
In this example, to view all of the port settings of STPD Test, enter
If your STPD has a name unique only to that STPD, the keyword
ExtremeWare XOS 11.3 Command Reference
Specifies an STPD name.
Specifies one or more ports or slots and ports.
Specifies more detailed information about one or more ports of the STPD.
"show Test ports"
show stpd ports
show stpd Test ports
is optional.
stpd
.
975