Disable Clear-Flow - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

CLEAR-Flow Commands

disable clear-flow

Disable the CLEAR-Flow agent.

Syntax Description

This command has no arguments or variables.

CLEAR-Flow is disabled by default.

Usage Guidelines

When the CLEAR-Flow agent is disabled, sampling stops and the and all rules are left in the current

state. It will not reset actions that were taken while CLEAR-Flow was enabled.

The following example disables CLEAR-Flow on the switch:

disable clear-flow

This command was first available in ExtremeWare XOS 11.1.

Platform Availability

This command is available on the BlackDiamond 10K platform only.

ExtremeWare XOS 11.3 Command Reference

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3