Show Snmpv3 Target-Params - Extreme Networks ExtremeWare XOS Command Reference Manual

show snmpv3 target-params

show snmpv3 target-params {[[hex <hex_target_params>] | <target_params>]}
Description
Displays the information about the options associated with the parameter name.
Syntax Description
hex_target_params
target_params
Default
N/A.
Usage Guidelines
Use this command to display entries from the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
If no parameter name is specified, all the entries are displayed.
Example
The following command displays the target parameter entry named P1:
show snmpv3 target-params P1
The following is sample output from this command:
Target Params Name
MP Model
Security Model
User Name
Security Level
Storage Type
Row Status
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_target_params
ExtremeWare XOS 11.3 Command Reference
Specifies the parameter to display. The value is to be supplied as a colon
separated string of hex octets.
Specifies the parameter name to display. The value is to be supplied in ASCII
format.
: p1
: snmpv2c
: snmpv2c
: testuser
: No-Authentication No-Privacy
: NonVolatile
: Active
parameter was added in ExtremeWare XOS 11.0.
show snmpv3 target-params
223