configure eaps shared-port mode
configure eaps shared-port <ports> mode <controller | partner>
Description
Configures the mode of the shared port.
Syntax Description
ports
controller
partner
Default
N/A.
Usage Guidelines
The shared port on one end of the common link must be configured to be the controller. This is the end
responsible for blocking ports when the common link fails thereby preventing the superloop.
The shared port on the other end of the common link must be configured to be the partner. This end
does not participate in any form of blocking. It is responsible only for sending and receiving health-
check messages.
Example
The following command configures the shared port 1:1 to be the controller.
configure eaps shared-port 1:1 mode controller
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms with a Core or an Advanced Core license.
ExtremeWare XOS 11.3 Command Reference
Specifies the port number of the shared port.
Specifies the controller mode. The controller is the end of the common link
responsible for blocking ports when the common link fails thereby preventing
the superloop.
Specifies partner mode. The partner is responsible only for sending and
receiving health-check messages.
configure eaps shared-port mode
911