Commands for Accessing the Switch
configure account password-policy char-validation
configure account [all | <name>] password-policy char-validation [none |
all-char-groups]
Description
Requires that the user include an upper-case letter, a lower-case letter, a digit, and a symbol in the
password.
Syntax Description
all
name
none
all-char-groups
Default
N/A.
Usage Guidelines
This feature is disabled by default.
Once you issue this command, each password must include at least two characters of each of the
following four types:
Upper-case A-Z
●
Lower-case a-z
●
0-9
●
!, @, #, $, %, ^, *, (, )
●
The minimum number of characters for these specifically formatted passwords is 8 characters and the
maximum is 32 characters.
Use the
option to reset the password to accept all formats.
none
Example
The following command requires all users to use this specified format for all passwords:
configure account all password-policy char-validation all-char-groups
44
Specifies all users (and future users).
Specifies an account name.
Resets password to accept all formats.
Specifies that the password must contain at least two characters from each of
the four groups.
NOTE: The password minimum length will be 8 characters if you specify this
option.
ExtremeWare XOS 11.3 Command Reference