Configure Cli Max-Failed-Logins - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Accessing the Switch

configure cli max-failed-logins

configure cli max-failed-logins <num-of-logins>
Description
Establishes the maximum number of failed logins permitted before the session is terminated.
Syntax Description
num-of-logins
Default
The default is three logins.
Usage Guidelines
The value must be greater than 0; the range is 1 to 10.
Example
The following command sets the maximum number of failed logins to five:
configure cli max-failed-logins 5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
56
Specifies the maximum number of failed logins permitted; the range is 1 to
10.
ExtremeWare XOS 11.3 Command Reference