Power Over Ethernet Commands
show inline-power stats ports
show inline-power stats ports <port_list>
Description
Displays inline power statistics for the specified ports.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
The output displays the following inline power statistics for the specified ports:
State—Displays the port power state:
●
Disabled
■
Searching
■
Delivering
■
Faulted
■
Disconnected
■
Other
■
Denied
■
PD's power class—Displays the class type of the connected PD:
●
"-----": disabled or searching
■
"class0": class 0 device
■
"class1": class 1 device
■
"class2": class 2 device
■
"class3": class 3 device
■
"class4": class 4 device
■
Absent—Displays the number of times the port was disconnected.
●
InvSig—Displays the number of times the port had an invalid signature.
●
Denied—Displays the number of times the port was denied.
●
Over-current—Displays the number of times the port entered an overcurrent state.
●
Short—Displays the number of times the port entered undercurrent state.
●
446
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
ExtremeWare XOS 11.3 Command Reference