Configure Vlan Add Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

configure vlan add ports

configure vlan <vlan_name> add [ports <port_list> | all] {tagged |
untagged} {stpd <stpd_name> {dot1d | emistp | pvst-plus}} {nobroadcast}
Description
Adds one or more ports in a VLAN.
Syntax Description
vlan_name
port_list
all
tagged
untagged
stpd_name
dot1d | emistp | pvst-plus
nobroadcast
Default
Untagged.
Usage Guidelines
NOTE
You cannot have both VLANs and VMANs on the same module on the BlackDiamond 8800 family of switches
(formerly known as Aspen); each module can have only VLANs or VMANs (although these can span modules).
The VLAN must already exist before you can add (or delete) ports: use the
create the VLAN.
NOTE
The nobroadcast option is available only on the BlackDiamond 10K switch.
If the VLAN uses 802.1Q tagging, you can specify tagged or untagged port(s). If the VLAN is untagged,
the ports cannot be tagged.
Untagged ports can only be a member of a single VLAN. By default, they are members of the default
VLAN (named Default). In order to add untagged ports to a different VLAN, you must first remove
them from the default VLAN. You do not need to do this to add them to another VLAN as tagged
ExtremeWare XOS 11.3 Command Reference
Specifies a VLAN name.
Specifies a list of ports or slots and ports.
Specifies all ports.
Specifies the ports should be configured as tagged.
Specifies the ports should be configured as untagged.
Specifies an STP domain name.
Specifies the BPDU encapsulation mode for these STP ports.
Prevents broadcasts, multicasts, and unknown unicast packets from being
transmitted on these ports.
NOTE: This option is available only on the BlackDiamond 10K switch.
configure vlan add ports
command to
create vlan
589