Show Eaps - Extreme Networks ExtremeWare XOS Command Reference Manual

show eaps

show eaps {<eapsDomain>} {detail}
Description
Displays EAPS status information.
Syntax Description
eapsDomain
detail
Default
N/A.
Usage Guidelines
If you enter the
show eaps
keyword.
detail
Use the optional domain
domain.
Some state values are different on a transit node than on a master node.
The fields displayed are as follows:
EAPS Enabled:
EAPS Fast Convergence:
Number of EAPS instances:
Name:
ExtremeWare XOS 11.3 Command Reference
Specifies the name of an EAPS domain.
Specifies all available detail for each domain.
command without a keyword, the command displays less than with the
parameter to display status information for a specific EAPS
eapsDomain
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
Displays only when Fast Convergence is on.
Number of EAPS domains created. The maximum number of EAPS domains
per switch is 128.
The configured name for this EAPS domain.
show eaps
921