Show Power - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

show power

show power {<ps_num>} {detail}
Description
Displays the current status of the installed power supplies.
Command Syntax
ps_num
detail
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the power supplies.
This status information may be useful for your technical support representative if you have a network
problem.
The switch collects the following power supply information:
State—Indicates the current state of the power supply. Options are:
●
Empty—There is no power supply installed.
■
Power Failed—The power supply has failed.
■
Powered Off—The power supply is off.
■
Powered On—The power supply is on and working normally.
■
Modular switches only:
Located next to the "State" of the power supply, the following information provides more detailed
status information. Options are:
Disabled for net power gain—Indicates that the power supply is disabled in order to maximize
■
the total available system power
Configured ON—Indicates that the user requested to enable a disabled power supply regardless
■
of the affect on the total available system power
Configured ON when present—Indicates that the power supply slot is currently empty, but the
■
user requested to enable the power supply regardless of the affect on the total available system
power
PartInfo—Provides information about the power supply. Depending on your switch, options include:
●
Modular switches only:
Serial number—A collection of numbers and letters, that make up the serial number of the power
■
supply.
192
Specifies the slot number of the installed power supply.
The detail option is reserved for future use.
ExtremeWare XOS 11.3 Command Reference