Extreme Networks ExtremeWare XOS Command Reference Manual page 545

Example
The following command displays the log configuration:
show log configuration target
The following is sample output from this command:
Log Target : memory-buffer
Enabled ? : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Debug-Data (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Buffer size : 1000 messages
Log Target : nvram
Enabled ? : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Warning (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Target : console
Enabled ? : no
Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
ion>
Log Target : primary-msm
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Error (through Critical)
Log Target : backup-msm
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Error (through Critical)
History
This command was first available in ExtremeWare XOS 10.1.
The and
primary-msm backup-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
ExtremeWare XOS 11.3 Command Reference
options were first available in ExtremeWare XOS 11.0.
show log configuration target
545