Configure Lldp Transmit-Hold - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands

configure lldp transmit-hold

configure lldp transmit-hold <hold>
Description
Calculates the actual time-to-live (TTL) value used in the LLDPDU messages. The formula is
transmit-
; by default the TTL value is (30*4) 120 seconds.
interval * transmit-hold
Syntax Description
hold Used to calculate the TTL value; the range is 2 to 10.
Default
4.
Usage Guidelines
N/A.
Example
The following command configures the transmit-hold value (which is used to calculate the TTL of the
LLDP packets) to 5:
configure lldp transmit-hold 5
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
398
ExtremeWare XOS 11.3 Command Reference