Extreme Networks ExtremeWare XOS Command Reference Manual page 221

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

show snmpv3 target-addr

This command was first available in ExtremeWare XOS 10.1.

This command was modified in ExtremeWare XOS 11.0 to display a list of tags if more than one was

configured and to display the timeout value for the entry in the snmpTargetAddrTable. This command

was also modified to support the

hex_addr_name

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3