Unconfigure Inline-Power Disconnect-Precedence - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure inline-power disconnect-precedence

unconfigure inline-power disconnect-precedence
unconfigure inline-power disconnect-precedence
Description
Unconfigures the disconnect precedence setting and returns the switch to the default disconnect
precedence value of deny port.
Syntax Description
This command has no arguments or variables.
Default
Deny-port.
Usage Guidelines
You configure this parameter for the entire switch; you cannot configure this per slot or per port.
Unconfigures the PoE disconnect precedence previously set for the switch and returns the disconnect
precedence to the default value of deny port. Deny port denies power to the next PD that requests
inline power from the slot when the inline power budget for the slot is reached, regardless of the inline
power port priority.
Example
The following command resets the switch to the PoE disconnect precedence value, which is deny port:
unconfigure inline-power disconnect-precedence
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
451
ExtremeWare XOS 11.3 Command Reference