Extreme Networks ExtremeWare XOS Command Reference Manual page 360

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Commands for Configuring Slots and Ports on a Switch

Unicast Flooding:

Multicast Flooding:

Broadcast Flooding:

BG QoS monitor: Unsupported

QoS Profile:

Ingress Rate Shaping :

Ingress IPTOS Examination:

Egress IPTOS Replacement:

Egress 802.1p Replacement:

Smart redundancy:

Software redundant port:

Redundant link configuration: Off

autopolarity:

On the BlackDiamond 10K switch, the screen displays both ingress and egress QoS settings. The 10Gbps ports have

8 ingress queues, and the 1 Gbps ports have 2 ingress queues.(Refer to the ExtremeWare XOS Concepts Guide for

more information on ingress queues, or bi-directional rate shaping.)

This command was first available in ExtremeWare XOS 10.1.

Information on ingress rate shaping was added in ExtremeWare XOS 11.0.

NetLogIn, Smart Redundancy, and rate limiting were added in ExtremeWare XOS 11.1.

Information on unicast, multicast, and broadcast flooding; the

autopolarity status were added in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

None configured

parameters were added in ExtremeWare XOS 11.3.

Port not present

ExtremeWare XOS 11.3 Command Reference

parameter; and

Extremeware xos 11.3