Show Fans - Extreme Networks ExtremeWare XOS Command Reference Manual

show fans

show fans {detail}
Description
Displays the status of the fans in the system.
Syntax Description
detail
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the fans.
This status information may be useful for your technical support representative if you have a network
problem.
The following fan information is collected by the switch:
State—The current state of the fan. Options are:
●
Empty: There is no fan installed.
■
Failed: The fan failed.
■
Operational: The fan is installed and working normally.
■
NumFan—The number of fans in the fan tray.
●
On modular switches, the output also includes the following information:
PartInfo—Information about the fan tray, including the:
●
Serial number, a collection of numbers and letters, that make up the serial number of the fan.
■
Part number, a collection of numbers and letters, that make up the part number of the fan.
■
Revision—The revision number of the fan.
●
Odometer—Specifies the power-on date and how long the fan tray has been operating since it first
●
powered-on.
Temperature—Specifies, in celsius, the current temperature of the fan. (BlackDiamond 10K switch
●
only.)
Fan Name—Specifies the individual state for each fan in a fan tray and its current speed in
●
revolutions per minute (rpm).
ExtremeWare XOS 11.3 Command Reference
The detail option is reserved for future use.
show fans
529