Show Mirroring - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show mirroring

show mirroring
Description
Displays the port-mirroring configuration on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
You must enable mirroring on the switch prior to configuring mirroring, and you must configure
mirroring to display mirroring statistics. Use the
mirroring and the
You can use this command to display mirroring statistics and determine if mirroring is enabled or
disabled on the switch.
Example
The following command displays switch mirroring statistics:
show mirroring
BlackDiamond 8800 family of switches (formerly known as Aspen) and Summit X450 switch only. Following
is sample output from this command on the BlackDiamond 8810 switch that is configured for port-
based mirroring:
Mirror port: 3:15 is up
Number of Mirroring filters: 3
Mirror Port configuration:
Port number 3:12 in
Port number 5:4 in
Port number 8:30 in
Following is sample output from this command on the Summit X450 switch that is configured for
mirroring a virtual port:
Mirror port: 12 is down
Number of Mirroring filters:1
Mirror Port configuration:
Port number 3 in vlan peggy.
350
configure mirroring add
all vlans ingress only
all vlans egress only
all vlans
enable mirroring to port
command to configure mirroring.
ExtremeWare XOS 11.3 Command Reference
command to enable