show version
show version {detail | process <name> | images {partition <partition>} {msm
<slotid>} }
Description
Displays the hardware serial and version numbers, the software version currently running on the
switch, and (if applicable) the software version running on the modules and power controllers.
Syntax Description
detail
process
name
images
partition
slotid
Default
N/A.
Usage Guidelines
The following describes the information displayed when you execute the
commands:
version detail
Part Number—A collection of numbers and letters that make up the part number of the switch and
●
when applicable the hardware components installed in a modular switch.
Serial Number—A collection of numbers and letters that make up the serial number of the switch
●
and when applicable the hardware components installed in a modular switch.
NOTE
For information about the physical location of the serial number on your switch, refer to the section that
describes your specific switch model in the Extreme Networks Consolidated XOS Hardware Guide.
Image—The ExtremeWare XOS software version currently running on the switch. If you have two
●
software images downloaded on the switch, only the currently running ExtremeWare XOS version
information is displayed. The information displayed includes the version number, build number, and
the software build date.
BootROM—The BootROM version currently running on the switch.
●
Depending on the model of your switch and the software running on your switch, different version
information may be displayed.
ExtremeWare XOS 11.3 Command Reference
Specifies display of slot board name and chassis or platform name.
Specifies display of all of the processes on the switch.
Specifies display of a specific process on the switch.
Specifies the display of installed images.
Specifies display of a specific partition (primary or secondary).
Specifies display of an MSM in a specific slot (A or B).
NOTE: This parameter is available only on modular switches.
show version
or
show version
show
569