Show Slot - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show slot

show slot {<slot> {detail} | detail }
Description
Displays the slot-specific information.
Syntax Description
slot
detail
Default
N/A.
Usage Guidelines
The command displays the following information:
show slot
• The slot number
• The type of module installed in the slot
• The type that the module is configured as
• The state of the module, whether the power is down, if the module is operational, if a diagnostic
being run, if there is a mismatch between the slot configuration and the module in the slot
• The number of ports on the module
If you do not specify a slot number, information for all slots is displayed.
Example
The following example displays module information for all slots:
BD-10808.2 # show slot
Slots Type
-------------------------------------------------------------------------------
Slot-1
Slot-2
Slot-3
Slot-4
Slot-5 G60T
Slot-6
Slot-7 G60T
Slot-8
MSM-A MSM-1XL
MSM-B MSM-1XL
Flags : M - Backplane link to Master MSM is Active
B - Backplane link to Backup MSM is also Active
D - Slot Disabled, S - Slot Secured
226
Specifies a slot on a modular switch.
Specifies detailed port information.
Configured
G60T
State Ports Flags
Empty 0
Empty 0
Empty 0
Empty 0
Operational 60 M
Empty 0
Operational 60 M
Empty 0
Operational 0
Present 0
ExtremeWare XOS 11.0 Command Reference Guide