Show Access-List Meter - Extreme Networks ExtremeWare XOS Command Reference Manual

ACL Commands

show access-list meter

show access-list counter {<metername>} [any | ports <portlist> | vlan
<vlanname>]
Description
Displays the specified access list meter statistics and configurations.
Syntax Description
metername
portlist
vlanname
Default
N/A.
Usage Guidelines
Use this command to display the ACL meters.
Example
The following example displays all the counters the ACL on port 7:1
show access-list meter port 2:1
The output of this command is similar to the following:
ACL Name
Meter
===============================================================================
donacl
m1
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the BlackDiamond 8800 family and Summit X450 switches.
684
Specifies the ACL meter to display.
Specifies to display the meters on these ports.
Specifies to display the meters on the VLAN.
Vlan Port
Committed Max Burst
Rate (Kbps) Size (K)
* 7:1
10000 Max
Out-of-Profile Out-of-Profile
Action DSCP Packet Count
Drop 0
ExtremeWare XOS 11.3 Command Reference