Commands for Configuring Slots and Ports on a Switch
G—Aggregation
■
S—Synchronization
■
C—Collecting
■
D—Distributing
■
F—Defaulted
■
E—Expired
■
Partner Port
●
The operational value of the port number assigned to this link by partner.
■
Up or Down
●
Enabled or disabled (not configurable)
●
Ready_N—Ready to be added to aggregator.
●
Wait pending
●
Ack pending
●
LAG Id
●
S—Displays information on controlling partner of LAG.
■
T—Displays information on controlled partner of LAG.
■
Stats
●
Rx - Accepted
■
Rx - Dropped due to error in verifying PDU
■
Rx - Dropped due to LACP not being up on this port
■
Rx - Dropped due to matching own MAC
■
Tx - Sent Successfully
■
Tx - Transmit error
■
Example
The following command displays LACP information on the specified port:
show lacp member-port 5
The following is sample output from this command on the Summit X450 switch:
Member
Rx
Port
State
--------------------------------------------------------------------------------
5
Current
================================================================================
Actor Flags: A-Activity, T-Timeout, G-Aggregation, S-Synchronization
The following command displays detailed LACP information on the specified port:
show lacp member-port 5 detail
The following is sample output from this command on the Summit X450 switch:
Member
Rx
Port
State
--------------------------------------------------------------------------------
348
Sel
Logic
Selected
C-Collecting, D-Distributing, F-Defaulted, E-Expired
Sel
Logic
Mux
Actor
State
Flags
Collect-Dist
A-GSCD--
Mux
Actor
State
Flags
Partner
Port
1005
Partner
Port
ExtremeWare XOS 11.3 Command Reference