Enable Netlogin Dot1X Guest-Vlan Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

enable netlogin dot1x guest-vlan ports

enable netlogin dot1x guest-vlan ports [all | <ports>]
Description
Enables the guest VLAN on the specified 802.1x netlogin ports.
Syntax Description
all
ports
Default
Disabled.
Usage Guidelines
A guest VLAN provides limited or restricted network access if a supplicant does not respond to the
802.1x authentication requests sent by the switch. You configure a guest VLAN only on netlogin ports
with 802.1x enabled; movement to a guest VLAN is not supported on netlogin ports with MAC-based
or web-based authentication. 802.1x must be the only authentication method enabled on the port for
movement to guest VLAN. A port always moves untagged into the guest VLAN.
By default, the switch attempts to authenticate the supplicant every 30 seconds for a maximum of three
tries. If the supplicant does not respond to the authentication requests, the client moves to the guest
VLAN. The number of authentication attempts is not a user-configured parameter. Use the following
command and specify the
configure netlogin dot1x timers [{server-timeout <server_timeout>} {quiet-period
<quiet_period>} {reauth-period <reauth_period>} {supp-resp-timeout
<supp_resp_timeout>}]
Before you can enable the guest VLAN on the specified ports, you must create the guest VLAN. To
create the guest VLAN, use the following command:
configure netlogin dot1x guest-vlan <vlan_name>
Example
The following command enables the guest VLAN on all ports:
enable netlogin dot1x guest-vlan ports all
History
This command was first available in ExtremeWare XOS 11.2.
ExtremeWare XOS 11.3 Command Reference
Specifies all ports included in the guest VLAN.
Specifies one or more ports included in the guest VLAN.
parameter to modify the supplicant response timer:
supp-resp-timeout
enable netlogin dot1x guest-vlan ports
863