Quit - Extreme Networks ExtremeWare XOS Command Reference Manual

quit

quit
quit
Description
Logs out the session of a current user for CLI or Telnet.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this command to log out of a CLI or Telnet session.
When you issue this command, you are asked to save your configuration changes to the current, active
configuration. Enter if you want to save your changes. Enter if you do not want to save your
y n
changes.
Example
The following command logs out the session of a current user for CLI or Telnet:
quit
A message similar to the following is displayed:
Do you wish to save your configuration changes to primary.cfg? (y or n)
Enter if you want to save your changes. Enter if you do not want to save your changes.
y n
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
181
ExtremeWare XOS 11.3 Command Reference