Configure Eaps Name - Extreme Networks ExtremeWare XOS Command Reference Manual

configure eaps name

configure eaps <old_name> name <new_name>
Description
Renames an existing EAPS domain.
Syntax Description
old_name
new_name
Default
N/A.
Usage Guidelines
If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks
recommends that you specify the identifying keyword as well as the actual name. If you do not use the
keyword, the system may return an error message.
Example
The following command renames EAPS domain "eaps-1" to "eaps-5":
configure eaps eaps-1 name eaps-5
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the current name of an EAPS domain.
Specifies a new name for the EAPS domain.
configure eaps name
907