Reset Inline-Power Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

reset inline-power ports

reset inline-power ports <port_list>
Description
Power cycles the specified ports.
Syntax Description
portlist
Default
N/A.
Usage Guidelines
This command power cycles the specified ports. Ports are immediately disabled and then re-enabled,
allowing remote PDs to be power-cycled.
This command affects only inline power; it does not affect network connectivity for the port(s).
Example
The following command resets power for port 4 on slot 3:
reset inline-power ports 3:4
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
ExtremeWare XOS 11.3 Command Reference
Specifies one or more slots and ports for which power is to be reset. May be in
the form 2:*, 2:5, 2:6-2:8.
reset inline-power ports
435